Sunday, November 11, 2007

Christmas Decorations in Kitchen

Here's this year's kitchen cabinet display. I like it alot. It's not completely done yet, but it's close. It needs more foo foo (that's what John's grandmother called it and that's what I call it). This is our first year with the NOEL lettes. I'll get a better shot because they shimmer in the light and are really gorgeous. The reindeer with sleigh was an impulse buy (John not me) from yesterday. The Annalee's are from an Amazon.com sale this past January. Four of the angel motionettes are from a thrift store.

I know this is not the best shot, but I couldn't hold the light fixture with one hand and take the photo with the other.
Posted by Picasa

So, Where Are Your Lights?

So far, we've got the roof outline and roof icicles up. All the other lights are inside. This may seem crazy to keep track of, but it's so easy to run in an enter a line to the spreadsheet.
Posted by Picasa

5,611 Lights Are Up So Far!!

Joey and John got a lot done today. So did I.

They outlined the whole roof with white GE 200 ct commercial grade lights. Yesterday, John put up the icicle lights. Tomorrow, the 17 stripes go up. The outline of the roof (above) used 1700 bulbs. We've dedicated three channels to the outline and two to the icicles.
Posted by Picasa

Saturday, November 10, 2007

Christmas Light Power Consumption Excel Spreadsheet

I spent 5 hours last night with John laying out maps, extension cords, controllers, security cameras, and power grids. I was going to use 3x5 index cards (one for each of the 64 channels). With Microsoft Excel 2007's new conditional formatting, a monkey could calculate power consumption. I still need to learn how to do Vlookup formulas. It's a breeze to move around strands of lights and instantly see how the total power is affected.



We have 4 controllers. The black grid is a screen shot of controller #4. All 16 of the channels are calculated and tallied automatically. The controller can handle a total of 15 amps. As of right now....

controller 1 - 14.91 amps used (.09 amps free)
controller 2 - 14.54 amps used (.46 amps free)
controller 3 - 14.88 amps used (.12 amps free)
controller 4 - 14.90 amps used (.10 amps free)

If we were to replace the 15 amp fuse in each of the 4 controllers, we would be able to draw 20 amps per controller. I'm not going to start messing with a circuit board though. Maybe next year.
Posted by Picasa

Slowly but surely

John got the icicle lights up in 5 hours by himself. I helped untangle and test the strands :)

200 bulbs per strand x 17 strands = 3,400 icicles bulbs
.51 amps per strand x 17 strands = 8.67 total amps
Half of the icicles will go on controller 1, channel 16.
The other half will go on controller 3, channel 8.

We estimated that we'd use 20 strands and we actually used 17...I'd MUCH rather over-estimate than under-estimate!!!

The Stuart Air Show was today, so we took a break from hanging icicle lights to watch an F-16 Fighting Falcon do a 15-minute routine. It was pretty cool and we plan on going to the airport tomorrow so we can see him perform (again) up close.
Posted by Picasa

Thursday, November 8, 2007

Sunsetter 20 Ft. Telescoping Flagpole

The concrete has cured and the flag is flying! I didn't know it's acceptable to fly the flag at night as long as there are spot lights on it. We'll have to get some permanent spots. We kind of like the flag in the front yard. Nice iron stain on the planter, huh?
Posted by Picasa

Computer Controlled Lights Testing

Here's a shot of "Area 25." Uh...anyway...we had to move operations from the garage to the back porch. You can see Joseph in his manger supporting an LOR controller panel. The long flat board at the bottom right is the revised 17-hole roof panel. I have another 13 holes that represent the mega tree immediately above Joseph's head. I screwed the controllers to plywood so that they don't rest on the floor. They are supposed to be upright and away from anyplace that may collect standing water. I'll get video up soon.
Posted by Picasa

Wednesday, November 7, 2007

Light-O-Rama Testing

I really need to work on getting the sequences done. Today, I drilled 17 holes in this piece of wood. The intent was to stick a single C7 light bulb in each hole, then hook up the lights to 17 channels on the LOR controllers. It will help to see the bulbs blink (for real) as opposed to watching the computer animation. When sequencing really fast songs, the animation does not sync perfectly on the screen. So, after I drilled all the holes, I tried screwing the bulbs in to the wood.......and found out that the wood is too thick. It's 3/4 inch pine.

Not having any other wood on hand, I drilled holes into cardboard (look under the wood). I knew the cardboard would be too flimsy.
Having wasted a few hours of prescious time, I went to Home Depot and got a piece of wall panneling for $.41. It had a dinged up corner so it was on clearance. I drilled a new set of 17 holes, popped lights in, hooked it up to LOR, and voila!
Posted by Picasa

Monday, November 5, 2007

Christmas Train Track in the Garage

Here's another shot of the christmas train track. Around the bend, I made the garland slowly move from the outside to the inside. The track is 5.5" wide by .75" thick. I should measure the track itself to see how many feet of track we have. I bet the garland is a 25 ft. stand, so maybe I can formulate an estimate based upon the garland.
Posted by Picasa

Stapled through Christmas lights

So, I have been stringing blue LED icicle lights under the train track today. Then, I hid the wires with green garland. It's slow going. I thought about doing the stringing before I raised the track, but I thought this way would be easier. It will sure turn out better than if I did it upside down, then flipped it. I'm using those 3M adhesive hooks. They're under $4 per package; each package contains 24. I used one package today and estimate I'll need another 5-6 to finish the project.

I hesitated to staple the stuff because I want to be able to resuse the track for years to come and not have to worry about staple holes. Plus, staples are much cheaper than adhesives. So, on my third staple, I shot one right through a strand of lights. Great. At least I was smart enough NOT to have the strand plugged in. So, can I pull out the staple, and continue? Or is the strand trashed now? If it does work, will it be dangerous? I dont know these answers, so I've posted the questions on Planet Christmas. Two people have replied saying the same thing:
Make sure the set is unplugged. Pull out the staple. Look at the wire, is it damaged at all? If the coating is damaged but nothing else, use electrical tape. If the wire is damaged, cut out the bad part, reconnect, cap it, and apply electrical tape. Even better is heat shrink tubing the same size as the wire if you happen to have any. Basically you want to make it waterproof.
Since, this is an indoor strand (which I failed to mention in my original post), I think it will be OK if I just put some tape on it and continue on.